每一张薄膜压力传感器均有上千个感测点，在同样的工作环境下会出现各感应点压力不一致的情况。

为了使薄膜压力传感器上的各个感应点感受到均匀一致的压力，因此通过传感器平衡装置对流体加压来为薄膜压力传感器进行检测、平衡、校准。

建议使用平衡装置来提高G-Scan系统的准确性和使用寿命。在平衡过程中，传感器被插入平坦的背板和充气气囊之间，气囊被充气以对传感器的有效区域施加均匀的压力。平衡过程允许软件补偿因制造或重复使用传感器而导致的各个传感元件之间的任何变化或不均匀输出。平衡设备可用于对传感器执行质量保证检查并确认传感器的均匀输出。

Each film pressure sensor has thousands of sensing points, and the pressure of each sensing point will be inconsistent in the same working environment.

In order to make each sensing point on the film pressure sensor feel uniform pressure, the film pressure sensor is detected, balanced and calibrated by pressurizing the fluid through the sensor balance device.

A balancing device is recommended to improve the accuracy and lifetime of the G-Scan system. During balancing, the sensor is inserted between a flat backplane and an inflated air bag, which is inflated to apply uniform pressure to the effective area of the sensor. The balancing process allows the software to compensate for any variation or uneven output among the individual sensing elements resulting from the fabrication or re-use of the sensor. Balancing devices can be used to perform quality assurance checks on sensors and confirm the uniform output of sensors.